ISCOM HT803 Крайно у-во за GEPON

58,54 лв. 48,78 лв.
На склад
SKU
5.7509/ONU
Icon Етикет Описание Тип Размер Смъкни
pdf RC_DS_ISCOM HT803 (T) (Rel_01).pdf pdf 510 KB Смъкни

The ISCOM HT803 is a new-generation product with plastic shell developed by Raisecom to meet the FTTH scenario. It provides one 1000 Mbit/s LAN interface, three 100 Mbit/s LAN interfaces, which can be directly

connected to the user laptop or computer, providing high-bandwidth Internet access. Featuring small size and light weight, it is easy to be installed in a splice box and can facilitate the upgrade and reconstruction of original

networks. Adopting an American or European power adapter and 12 V power supply and featuring low power consumption, it is environmentally friendly, as shown below.

Features:

  • Small size, elegance, light weight, suitable for home use
  • Comply with IEEE 802.3ah and China Telecommunication Industry Standards.
  • Support multiple management modes, such as OLT remote management and EMS and provide abundant alarms, which reduces the location time and maintenance cost.
  • It is cost-effective, which reduces the network construction cost of a single unit in the FTTH scenario and is suitable for large scale promotion.
  • It has rich functions, which can be preconfigured according to different customers and provinces, thus implementing plug and play and facilitating service activation and maintenance.
  • Pass the carrier interworking and centralized procurement test, which is a guarantee for interworking with OLTs from other companies.

Specifications:Hardware features

  • Dimensions 140 mm (Length) 105 mm (Width) 33 mm (Height)
  • Weight 1 kg
  • Maximum power consumption 5 W
  • Power adapter input 100240 VAC 50/60Hz
  • Power adapter output 12 VDC 1 A
  • Operating temperature 050C
  • Operating humidity 10%93% (non-condensing)
  • Altitude 5000 m

Software features

  • Support auto-negotiation, flow control, and rate limiting on the interface.
  • Support interface isolation.
  • Support gathering statistics of unicast and multicast packets received and sent by the interface.
  • Support configuring CIR, CBS, PIR, and PBS.
  • Support configuring the MTU, which is 1518 bytes by default.
  • Support configuring the aging time of MAC addresses and querying and clearing dynamic MAC addresses.
  • Support storm control over DLF, unknown multicast and broadcast packets.
  • Support detecting loops among UNIs on the same ONU or on different ONUs (does not detect loops among ONU uplink interfaces).
  • Support IEEE 802.1Q.
  • Support 4094 concurrent VLANs.
  • Support CTC VLAN mode.
  • Support VLAN Stacking which complies with the IEEE 802.1ad.
  • Support Layer 2 traffic classification match field, such as destination MAC address, original MAC address, VLAN ID, CoS, and Ethernet type.
  • Support Layer 3 traffic classification match field, such as destination IPv4 address, original IPv4 address, IP, and DSCP.
  • Support Layer 4 traffic classification match field, such as TCP source interface, TCP destination interface, UDP source interface, and UDP destination interface.
  • Support QoS and ACL traffic classification action.
  • Support priority scheduling, such as SP and WFQ.
  • Support IGMP/MLD Snooping.
  • Support transmitting multicast packets transparently.
  • Support DHCP Snooping.
  • Support PPPoE Relay.
  • Support discovering partner devices and querying SNMP configurations.
  • Support managing the OLT, Web, and CLT.
  • Support interface UP/DOWN, and power failure alarms.
  • Support querying information about the optical module.
  • Support querying the memory and CPU utilization rate.

Parameters of the EPON interface

  • EEE802.3ah
  • Uplink:1.25 Gbit/s
  • Downlink: 1.25 Gbit/s
  • 20 km
  • SC/PC
  • Single-mode fiber
  • Tx: 1310 nm

Rx: 1490 nm

Повече информация
Manufacturer Raisecom
Напишете вашето мнение
Вие оценявате:ISCOM HT803 Крайно у-во за GEPON
Icon Етикет Описание Тип Размер Смъкни
pdf RC_DS_ISCOM HT803 (T) (Rel_01).pdf pdf 510 KB Смъкни